Máy Khoan Định Hướng JT60
Quý Khách Để Lại Số Điện Thoại, Nhân Viên Tư Vấn Sẽ Gọi Lại Ngay !
OPERATION | U.S. | METRIC |
---|---|---|
Spindle speed, max | 240 rpm | |
Spindle speed (AT inner spindle), max | 250 rpm | |
Spindle torque, max | 9,000 ft·lb | 12200 N·m |
Spindle torque (AT inner spindle), max | 2,000 ft·lb | 2700 N·m |
Carriage thrust travel speed | 100 fpm | 30.5 m/min |
Carriage pullback travel speed | 100 fpm | 30.5 m/min |
Thrust force | 60,000 lb | 267 kN |
Pullback force | 60,000 lb | 267 kN |
Bore diameter | 5 in | 127 mm |
Backreamer diameter | Variable | |
Ground travel speed | ||
Forward/reverse | 2.5 mph | 4 km/h |
POWER (TIER 3) | ||
---|---|---|
Engine | Cummins® QSB6.7 | |
Fuel | Diesel | |
Cooling medium | Liquid | |
Injection | Direct | |
Aspiration | Turbocharged & charge air cooled | |
Number of cylinders | 6 | |
Displacement | 4.08 in3 | 6.7 L |
Bore | 4.21 in | 107 mm |
Stroke | 4.88 in | 124 mm |
Manufacturer’s gross power rating | 190 hp | 142 kW |
Rated speed | 2,200 rpm | |
Emissions compliance | EPA Tier 3 | Stage IIIA |
POWER (TIER 4) | ||
---|---|---|
Engine | Cummins QSB6.7 | |
Fuel | Diesel | |
Cooling medium | Liquid | |
Injection | Direct | |
Aspiration | Turbocharged & charge air cooled | |
Number of cylinders | 6 | |
Displacement | 408 in3 | 6.7 L |
Bore | 4.21 in | 107 mm |
Stroke | 4.88 in | 124 mm |
Manufacturer's gross power rating | 200 hp | 149 kW |
Rated speed | 2,200 rpm | |
Emissions compliance | EPA Tier 4 | EU Stage IV |
DIMENSIONS | ||
---|---|---|
Length | 331 in | 8.41 m |
Width | 87 in | 2.21 m |
Height | 101 in | 2.57 m |
Operating mass | 31,080 lb | 14,098 kg |
Entry angle | 10-16° | |
Angle of approach | 18° | |
Angle of departure | 13° |
DRILLING FLUID SYSTEM | ||
---|---|---|
Pressure, max | 1,300 psi | 90 bar |
Flow, max | 150 gpm | 560 l/min |
FLUID CAPACITIES | ||
---|---|---|
Hydraulic reservoir | 36 gal | 136 L |
Fuel tank | 55 gal | 208 L |
Engine lubrication oil, w/ filter | 19 qt | 18 L |
Engine cooling system | 31 qt | 29 L |
Antifreeze tank | 16 gal | 60 L |
DEF Tank | 3.6 gal | 13.6 L |
POWER PIPE® HD (2.46-4) | ||
---|---|---|
Length of dril pipe, nominal | 180 in | 4.57 m |
Diameter of drill pipe, tool joint end | 3.5 in | 89 mm |
Diameter of drill pipe | 3.06 in | 78 mm |
Bend radius, min | 170 ft | 52 m |
Weight of drill pipe, lined | 187 lb | 85 kg |
Weight of drill pipe and large box (28 pipe) | 5,236 lb | 2,375 kg |
Weight of drill pipe and small box (16 pipe) | 2,992 lb | 1,357 kg |
POWER PIPE FORGED (#900) | ||
---|---|---|
Length of dril pipe, nominal | 180 in | 4.57 m |
Diameter of drill pipe, tool joint end | 3.25 in | 83 mm |
Diameter of drill pipe | 2.88 in | 73 mm |
Bend radius, min | 169 ft | 52 m |
Weight of drill pipe | 180 lb | 82 kg |
Weight of drill pipe and large box (28 pipe) | 5,040 lb | 2,285 kg |
Weight of drill pipe and small box (16 pipe) | 2,880 lb | 1,306 kg |
BATTERY (2 USED) | |
---|---|
SAE reserve capacity rating | 195 min |
SAE cold crank rating @ 0°F (-18°C) | 950 amps |
NOISE LEVEL | |
---|---|
Operator sound pressure per ISO 6394 | < or = 81 dBA |
Exterior sound power per ISO 6394 | < or = 106 dBA |
VIBRATION LEVEL |
---|
Average vibration transmitted to the operator’s hand and whole body during normal operation does not exceed 2.5 and 0.5 m/sec2 respectively. |
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. |
Công Ty Cổ Phần Đa Phúc
Địa chỉ: Số 09 - Đường Cao Xuân Huy - Phường Vinh Tân - Tp Vinh - Nghệ An
Hotline: 0238.3.757.757 - 091.6789.556
Email : ctcpdaphuc@gmail.com