Máy Khoan Định Hướng JT100 All Terrain
Quý Khách Để Lại Số Điện Thoại, Nhân Viên Tư Vấn Sẽ Gọi Lại Ngay !
OPERATION | U.S. | METRIC |
---|---|---|
Spindle speed, max (AT inner spindle) | 270 rpm | |
Spindle torque, max (AT inner spindle) | 2,000 ft·lb | 2700 N·m |
Carriage thrust travel speed | 150 fpm | 46 m/min |
Carriage pullback travel speed | 150 fpm | 46 m/min |
Thrust force | 70,000 lb | 311 kn |
Pullback force | 100,000 lb | 445 kn |
Bore diameter | 6.25 in | 159 mm |
Backream diameter | Soil dependent | |
Ground travel speed | ||
Forward/reverse | 3.6 mph | 5.8 km/h |
POWER | U.S. | METRIC |
---|---|---|
Engine | Cummins QSB6.7 | |
Fuel | Diesel | |
Cooling medium | Liquid | |
Injection | Direct | |
Aspiration | Turbocharged & charge air cooled | |
Number of cylinders | 6 | |
Displacement | 409 in3 | 6.7 L |
Bore | 4.21 in | 107 mm |
Stroke | 4.88 in | 124 mm |
Manufacturer's gross power rating | 260 hp | 194 kW |
Power Bulge at 2,000 rpm | 270 hp | 201 kW |
Estimted net power rating | 257 hp | 192 kW |
Rated speed | 2,200 rpm | |
Emissions compliance | EPA Tier 4 | EU Stage IV |
DIMENSIONS | U.S. | METRIC |
---|---|---|
Length | 368 in | 9.35 m |
Width | 101 in | 2.57 m |
Height | 110 in | 2.79 m |
Weight | 50,740 lb | 23,015 kg |
Entry angle | 10-15° | |
Angle of approach | 13° | |
Angle of departure | 17° |
DRILLING FLUID SYSTEM (ON BOARD) | U.S. | METRIC |
---|---|---|
Drilling fluid pressure, max | 1,000 psi | 69 bar |
Drilling fluid flow, max (AT - 120 gpm pump) | 230 gpm | 870 l/min |
FLUID CAPACITIES | U.S. | METRIC |
---|---|---|
Hydraulic reservoir | 47 gal | 180 L |
Fuel tank | 97 gal | 370 L |
ALL TERRAIN PIPE | U.S. | METRIC |
---|---|---|
Length of drill pipe, nominal | 169.50 in | 4.31 m |
Diameter of drill pipe, tool joint end | 4.5 in | 114 mm |
Diameter of drill pipe | 3.63 in | 92 mm |
Bend radius, min | 205 ft | 63 m |
Weight of drill pipe | 284 lb | 130 kg |
Weight of drill pipe & box (12 pipe) | 4,430 lb | 2010 kg |
BATTERY (2 USED) | |
---|---|
SAE reserve capacity rating | 450 min |
SAE cold crank rating @ 0ºF (-18ºC) | 1,400 amps |
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. |
Công Ty Cổ Phần Đa Phúc
Địa chỉ: Số 09 - Đường Cao Xuân Huy - Phường Vinh Tân - Tp Vinh - Nghệ An
Hotline: 0238.3.757.757 - 091.6789.556
Email : ctcpdaphuc@gmail.com
máy khoan định hướng ngangmáy khoan ngang HDDthi công khoan qua đườngkhoan qua đường tại Nghệ An