Máy Khoan Định Hướng JT40
Quý Khách Để Lại Số Điện Thoại, Nhân Viên Tư Vấn Sẽ Gọi Lại Ngay !
OPERATION | U.S. | METRIC |
---|---|---|
Spindle speed, max | 225 rpm | |
Spindle torque, max | 5,500 ft·lb | 7460 N·m |
Carriage thrust travel speed | 180 fpm | 55 m/min |
Carriage pullback travel speed | 180 fpm | 55 m/min |
Thrust force | 40,000 lb | 178 kN |
Pullback force | 40,000 lb | 178 kN |
Bore diameter | 4.5 in | 114 mm |
Backreamer diameter | Soil dependent | |
Ground travel speed | ||
Forward/reverse | 3.0 mph | 4.8 km/h |
POWER (TIER 3) | U.S. | METRIC |
---|---|---|
Engine | Cummins QSB4.5 | |
Fuel | Diesel | |
Cooling medium | Liquid | |
Injection | Direct | |
Aspiration | Turbocharged & charge air cooled | |
Number of cylinders | 4 | |
Displacement | 275 in³ | 4.5 L |
Bore | 4.21 in | 107 mm |
Stroke | 4.88 in | 124 mm |
Manufacturer’s gross power rating | 148 hp | 110 kW |
Rated speed | 2,300 rpm | |
Emissions compliance | EPA Tier 3 | Stage IIIA |
POWER (TIER 4) | U.S. | METRIC |
---|---|---|
Engine | Cummins QSB4.5 | |
Fuel | Diesel | |
Cooling medium | Liquid | |
Injection | Direct | |
Aspiration | Turbocharged & charge air cooled | |
Number of cylinders | 4 | |
Displacement | 275 in³ | 4.5 L |
Bore | 4.21 in | 107 mm |
Stroke | 4.88 in | 124 mm |
Manufacturer's gross power rating | 160 hp | 119 kW |
Rated speed | 2,300 rpm | |
Emissions compliance | EPA Tier 4 | EU Stage IV |
DIMENSIONS | U.S. | METRIC |
---|---|---|
Length | 290 in | 7.37 m |
Width, w/open station | 89 in | 2.26 m |
Width, w/cab | 93 in | 2.36 in |
Height | 97 in | 2.46 m |
Operating mass | 20,500 lb | 9300 kg |
Entry angle | 20-29% | |
Angle of approach | 17° | |
Angle of departure | 17° |
WEIGHT CONFIGURATION | U.S. | METRIC |
---|---|---|
Cab option | 690 lb | 310 kg |
Standard anchor option | 750 lb | 340 kg |
HD anchor option | 1,290 lb | 590 kg |
Deduct Tier 3 engine option | 165 lb | 70 kg |
110 gpm Fluid Pump Option | 320 lb | 145 kg |
DRILLING FLUID SYSTEM | U.S. | METRIC |
---|---|---|
Pressure, max | 1,000 psi | 69 bar |
Flow, max | 70 gpm | 265 l/min |
Pressure, max 110 option | 800 psi | 55 bar |
Flow, max 110 option | 110 gpm | 416 I/min |
FLUID CAPACITIES | U.S. | METRIC |
---|---|---|
Hydraulic reservoir | 17 gal | 64 L |
Fuel tank | 56 gal | 212 L |
Engine lubrication oil, w/filter | 13.7 qt | 13 L |
Engine cooling system | 24 qt | 22.7 L |
Antifreeze tank | 8 gal | 30 L |
Diesel exhaust fluid tank | 3.6 gal | 13.6 L |
POWER PIPE® HD | U.S. | METRIC |
---|---|---|
Length of dril pipe, nominal | 180 in | 4.57 m |
Diameter of drill pipe, tool joint end | 3.13 in | 80 mm |
Diameter of drill pipe | 2.81 in | 71 mm |
Bend radius, min | 146 ft | 45 m |
Weight of drill pipe, lined | 150 lb | 68 kg |
Weight of drill pipe and large box (40 pipe) | 7,140 lb | 3240 kg |
Weight of drill pipe and small box (20 pipe) | 3,797 lb | 1720 kg |
HIWS1 PIPE | U.S. | METRIC |
---|---|---|
Length of dril pipe, nominal | 180 in | 4.57 m |
Diameter of drill pipe, tool joint end | 3.10 in | 79 mm |
Diameter of drill pipe | 2.63 in | 67 mm |
Bend radius, min | 145 ft | 44 m |
Weight of drill pipe | 165 lb | 75 kg |
Weight of drill pipe and large box (35 pipe) | 6,915 lb | 3140 kg |
Weight of drill pipe and small box (15 pipe) | 3,287 lb | 1490 kg |
BATTERY | |
---|---|
SAE reserve capacity rating | 195 min |
SAE cold crank rating @ 0°F (-18°C) | 950 amps |
NOISE LEVEL | |
---|---|
Operator sound pressure per ISO 6396 | < or = 85 dBA |
Operator sound pressure per ISO 6396, w/cab | < or = 73 dBA |
Exterior sound power per ISO 6395 | < or = 103 dBA |
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. |
Công Ty Cổ Phần Đa Phúc
Địa chỉ: Số 09 - Đường Cao Xuân Huy - Phường Vinh Tân - Tp Vinh - Nghệ An
Hotline: 0238.3.757.757 - 091.6789.556
Email : ctcpdaphuc@gmail.com